 |
 |
|
|
 |
 |
| |
2003 has seen the exciting launch of a product set to redefine the transport of wine and many other containerised goods.
The Enviro-tuff Liner or ETL is a new innovation to arrive in the marketplace and will quickly replace existing insulation alternatives due to its supreme efficiency and effectiveness.
The Enviro-tuff Liner is a product specially designed to insulate shipping containers enabling the good within to be protected from the dangerous temperature spikes witnessed during transport. |
|
|
|
 |
 |
Across all industries, moving products in standard dry shipping containers can expose the goods to severe temperature fluctuations. In many cases this can cause irreversible damage to the product resulting in lost sales and expensive |
|
|
|
| |
insurance claims. A prime example of where temperature variations can cause havoc in during transportation of wine. Even minimal fluctuations can results in such problems as the loss of bouquet, oxidation, cork dryness and leakage, all these outcomes undoing the fine and competitive art of winemaking.
|
|
|
|
 |
| |
The ETL offers more than the alternatives. It is more cost effective and better performing than bubble wrap thermal blankets and is much cheaper, stronger and easier to install than other types of liners. ETL does not require the use of double sided adhesive tapes, glues, mechanical blowers, etc, during installation inside an ISO container. You hang the ETL using the lashings provided and tie it to the lugs found inside the ISO container. This task can be done quickly by one operator.
The ETL is specifically designed for usage in general purposes of ISO shipping containers both 20' and 40'. However, because of the versality and ability of the Enviro-tuff material, we have also designed liners for the use on road, rail and air. As you can see below we have a full range of Enviro-tuff Liners. |
|
|
|
 |
Properties |
Test Methods |
Value |
Weight |
In - House |
140 gsm + / - 10 gsm |
Water Vapour Transmission
Rate |
ASTM F1249 |
<0.09 g/m2/day |
Emissivity (AI Surface) |
ASTM E408 |
<0.03 |
Tensile Strength
MD
TD |
In - House |
500 - 600 (N/50 mm)
500 - 600 (N/50 mm)
|
Elongation
MD
TD |
In - House |
15 - 20%
15 - 20%
|
Initial Tear Strength
MD
TD |
ASTM D1004 |
35 - 45 N
35 - 50 N
|
Index Puncture Test |
ASTM D4833 |
230 - 270 N |
|
|
 |
 |
HOW IT WORKS
ETL works by reflecting up to 97% of the radiant heat and preventing hot or cold air coming through the sealed liner which would affect the goods. |
|
 |
PRODUCT RANGE
Various types of Enviro-tuff liners widely used in the market. |
|
|
|
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
